The revolution on HHO CELL PWM power supply!
Just connect two direct wired from APS60A to the HHO CELL, two wires to the battery power supply and the two small wires APS60A power supply, your HHO CELL is reay to work without any other Relays, fuse or device! The APS60A will automatic reconize the car/truck engine ON and will power the HHO CELL ONLY when the Engine is Running! Power OFF the car engine and the HHO CELL will be powered OFF too. With the APS60A you will save 1 or 2 hours of electrical work installation, plug&play system and your HHO car is ready to drive!
APS60A SPECIFICATIONS:
- Direct connecto from Battery Input to HHO CELL generator, without external relays.
* 60A MAX HHO CELL Generator Powersupply.
* 60AExternal Automotive Fuse. - * Dual LED meter: Voltmeter + Ammeter, 5 to 40V, 60A.
* Auto detect battery voltage and auto configuration for: +12V/+24V power supply
* Quad operational chip sensor with 1% tollerance Zenner voltage detector.
* Auto power ON HHO CELL when the Engine is running
* 1 Second delay PWM control, after Engine ON is detected.
* Auto Power OFF HHO CELL when Engine is turned OFF.
* Soft PWM startup to the max Ampere out power supply.
* Embedded trimmer for PWM control: from 0% to 100% HHO CELL power supply.
* Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery.
* Embedded 4 way power barrier: Positive, Gnd, CELL – OUT, CELL + OUT.
* Optional Water tank sensor switch embedded on system.
* Compact black ABS cabinet + Alluminium dissipator for the 60A Mosfet.
* Measure only: 110X85X40 mm.
PACKAGE KIT:
The APS60A Blister kit include the follow items:
* 1 Pcs APS60A Auto Power Switch device
* 1 Pcs External Automotive 60A fuse, that support up to 3 mm diameter wires.
* 1 Pcs 50Cm RED wire, diameter 0.5 mm for direct powersupply device from the Battery.
* 1 Pcs 50Cm BLACK wire, diameter 0.5 mm for direct powersupply device from the Battery.
* 4 Pcs YELLOW terminal crimp.
* 2 Pcs Wrapper
* User manual