The ONLY 100A HHO PWM available Worldwide.
The revolution on HHO CELL PWM power supply with Costant Ampere output control.
Just connect two direct wired from APS100A to the HHO CELL-Black Box, two wires to the battery power supply and the two small wires APS100A power supply, your HHO CELL is reay to work without any other Relays, fuse or device! The APS100A will automatic reconize the car/truck engine ON and will power the HHO CELL ONLY when the Engine is Running! Power OFF the car engine and the HHO CELL will be powered OFF too. With the APS100A you will save 1 or 2 hours of electrical work installation, plug&play system and your HHO truck is ready to drive! APS100A is designg and specific developed for the DC8000 and DC12000 BLACK BOX, but can also be used for the single HHO CELL Unit.
APS100A SPECIFICATIONS:
- Direct connecto from Battery Input to HHO CELL generator, without external relays.
* 100A MAX HHO CELL Generator Powersupply.
* 80A INTERNAL Automotive Fuse. - * 3 BIG TO-347 MOSFET PWM driver.
- * 4 big 100A Terminal blocks that can supply up to 8mm diameter wires
- * New Auto switch trimmer for adjust the Engine ON Voltage detector.
- *DIP Switch configuration: 1) Auto switch Adjust enalbe, 2) Water tank sensor enalbe/disalbe
- * Dual LED meter: Voltmeter + Ammeter, 5 to 40V, 99A.
* Auto detect battery voltage and auto configuration for: +12V/+24V power supply
* Quad operational chip sensor with 1% tollerance Zenner voltage detector.
* Auto power ON HHO CELL when the Engine is running
* 1 Second delay PWM control, after Engine ON is detected.
* Auto Power OFF HHO CELL when Engine is turned OFF.
* Soft PWM startup to the max Ampere out power supply.
* Embedded adjustable trimmer for costant Ampere output control: : Min trimmer: 3A, Midle trimmer 40A, max trimmer:100A
* Logical IC sensor, MUST be powered with 2 wires DIRECT from the battery.
* Embedded 4 way power barrier: Positive, Gnd, CELL – OUT, CELL + OUT.
* Optional Water tank sensor switch embedded on system.
* Compact black ABS cabinet + BIG Alluminium dissipator for the 3 big TO-347 Mosfet.
* Measure only: 150X85X80 mm.
More installation fotos:
The APS100A Blister kit include the follow items:
* 1 Pcs APS100A Auto Power Switch device
* 1 Pcs 50Cm RED wire, diameter 0.5 mm for direct powersupply device from the Battery.
* 1 Pcs 50Cm BLACK wire, diameter 0.5 mm for direct powersupply device from the Battery.
* 2 Pcs Wrapper
* User manual