Industrial Hydrogen Generator LIONSTRACS
Hydrogen Generators, separate ultrapure water into hydrogen and oxygen gas, blended and pressurized, using a small amount of electric power via our patented process and new generation of WET-CELL modular system.
Our products make this gas on demand, which means no worries about transporting and storing dangerous pressurized gas fuel tanks. These gases are immediately delivered as a mixed fuel gas, for use as combustion booster in motor generators, ship motors or boilers.
Oxy-Hydrogen gas used alone permits to reduce the fuel consumption considerably and clean deeply the combustion chamber, used coupled with fuel emulsions allows to reduce consumption and emission in an outstanding manner.
Revolutionary LIONSTRACS technology, enables large capacity, 24 hour 365 day pure Oxy-hydrogen* gas production.
Fully automated touch screen control system (PLC) with remote control function, Mobile phone web server and tracking.
Engine Generators ( Genset) : Inefficient incomplete fuel combustion Due to the prolonged use of the engines in generators, the accumulation of carbon deposits and incomplete fuel combustion create significant waste and lubricating oil contamination. This results in an estimated 20 percent increase in wasted fuel costs. Our optimized combustion reaction... ..
Our optimized combustion reaction actually cleans the engine while in normal use increasing perfomances and reducing maintenance.
LIONSTRACS Ultra H Generators, dramatically increase the efficiency of engine generators.
Results vary with operating environment, however we have found Engine Generator fuel savings of 5~35%. Trial run feedback includes:
- Engine Runs Smoother
- Impressive less Hazardous Carbon Emissions (NOx, PM, CO)
- The Gradual Increase of Fuel Saved up to 35% (as the engine self cleans because oxyhydrogen and with the MAP Sesnor modification for compensate the new fuel)
- Lubricating oil life increased up 50%
- Less engine maintenance
Ultra H Gen. Specification table:
|
Model Ultra H |
W-5K |
W-10K |
W-20K |
W-30K |
W-40K |
|
Hho liters h |
2100 |
4.200 |
8.400 |
12.600 |
16.800 |
|
Hho liters LPM |
35 |
70 |
140 |
210 |
280 |
|
Wet Cell Module |
1 Small |
1 |
2 |
3 |
4 |
|
Max Power kWh consumption |
4.5 kWh |
7.5 kWh |
15 kWh |
21.5 kWh |
30 kWh |
|
Water consumption (L/h) |
2,1 |
2.25 |
4.5 |
6.7 |
9 |
|
Max Amperage full working |
9A |
18A |
36A |
54A |
72A |
|
Power supply (V/hz) |
380 / 50/60 |
380 / 50/60 |
380 / 50/60 |
380 / 50/60 |
380 / 50/60 |
|
Working Pressure (mbar) |
40-250 |
40-250 |
40-250 |
40-250 |
40-250 |
|
Embedded Pure Water 20" Cards |
3 |
4 |
4 |
5 |
6 |
|
Environment temperature (C) |
0-36 |
0-36 |
0-36 |
0-36 |
0-36 |
|
Water Cooling |
No |
Option |
Option |
Option |
Option |
|
Power protection grade |
IP2S |
IP2S |
IP2S |
IP2S |
IP2S |
|
Working mode |
Continuous |
Continuous |
Continuous |
Continuous |
continuos |
|
Users remote control (#) |
1 |
1-2 |
1-2 |
1-2 |
1-2 |
|
Dimensions (Cm L x W x H) |
170 x 80 x 170 |
170 x 85 x 170 |
170 x 85 x 180 |
170 x 135 x 180 |
170 x 150 x 180 |
|
Weight (kg) |
320 |
430 |
580 |
760 |
1100 |
Additional Ultra H Hydrogen Gen. specifications:
-
Ultra efficiency H generator.
-
Continuos Duty on Demand 24/24 hours with No stopping Hydrogen generator
-
system KOH concentrate on water tank only 1%, will reducing the production cost and less maintenance .
-
Automatic loading KOH concentrate controlled by special Plc conductivity sensor
-
Pure water quality embedded production controlled by HMDI Plc controller.
-
Water inlet pressure manometer
-
Water outlet system pressure manometer with Plc low pressure control.
-
Air compressor outlet system manometer with Plc low pressure control
-
Defrosting hydrogen gas with optical sensor Plc control
-
3 X 10" filters defrosting and security flashback.
-
1 X 20" filters as level bubbler and security flashback.
-
Air Compressor for washing the system, no hydrogen gas remain on generator on standby mode or when the remote control request to stopping gas production.
-
Separate circuit breaker for Plc system and DC power supply.
-
Automatic Restart Powersupply if on overload, over temperature with alarm on display.
-
Plc pre alarm mode for water quality,air compressor, power supply status and much more.
- DC Power Supply Timing programmed for the Polarity +/- inversion connection on WET-CELL.
-
All the H generator is FULL remote controlled by Internet web Server from PC and Mobile Phone.
PLC Siemens sensors and controller list:
|
Q |
Outputs controls |
i |
Inputs control |
|
1 |
Fan Motor |
1 |
Watts Meter Analok |
|
2 |
Water Tank to Cell Pump |
2 |
Trimm POT Analog |
|
3 |
Water Main Input Valve |
3 |
H Main switch ON/OFF |
|
4 |
Pump drain/waste Filters |
4 |
LOAD Switch ON/OFF |
|
5 |
Loading Water on Big Bubbler |
5 |
Water flow meter sensor |
|
6 |
Drain Big Bubbler |
6 |
Flow sensor 2 |
|
7 |
Water Tank Valve |
7 |
Pressure sensor Analog |
|
8 |
Load Filters 2+3 |
8 |
KOH sensor Analog |
|
9 |
Filter 1 Drain |
9 |
LOW Tank Level Water |
|
10 |
Filter 2 Drain |
10 |
HIGH Tank Level Water |
|
11 |
Filter 3 Drain |
11 |
Over HIGH Tank Level Water limit |
|
12 |
Gas H Valve OUT 1 |
12 |
HIGH Bubbler Level water |
|
13 |
Load Filter 1 |
13 |
HIGH Filter 1 Water |
|
14 |
Gas H MAX Filter Valve |
14 |
HIGH Filter 2 Water |
|
15 |
AIR Tank Valve |
15 |
HIGH Filter 3 Water |
|
16 |
KOH Input Valve |
16 |
Low KOH Level Tank |
|
17 |
GAS H OUT Tank Drain |
17 |
LOW Air Pressure system |
|
18 |
Map/Maf Sensor control Genset |
18 |
Start 1 Remote Control |
|
19 |
FAN reverse mode for heating |
19 |
Start 2 Remote Control |
|
20 |
Alarm Lamp and Buzzer |
20 |
HIGH Pressure Flash Back |
|
1B |
RST Power ON/OFF |
21 |
Water Quality sensor |
|
2B |
Power 400A DC contactor |
22 |
LOW water pressure Input |
|
3B |
Power Contactor 1 |
23 |
LOW Pressure |
|
4B |
Power Contactor 2 |
24 |
Emergency Switch |
The remain 270 function and sensor are not listed for copyright protection know how.
