HHO OBD FC-Fuel Cutter Enhancer
First beta release User Manual on PDF
The HHO Cell Revolution is Here!
The first worldwide available OBD HHO Fuel Cutter Enancher, with Programmable Digital MAP/MAF & O2 Oxygen Sensor trimmer,full controlled in realtime by OBDII Scan Tool Pro and with 4 Programmable Presets, Automatically recalled from OBD II veichle speed!
Many HHO manufacture of electronics tuning, offer a lot of different analog MAP/MAF and O2 sensor accessory for Tuning the HHO Dry Cell system. All of this devices are manually and analog setting, by simple hardware trimmers or potentiometers. The main problem for best tuning the HHO System, require the final test with one professional OBD II Scan Tool, that can reconize or ble to display the all basic OBD features. Only with one external OBD II Scan Tool analizer is possible fine pitch the all MAP/MAF and O2 sensor, because the TRUE vale is returned back from the ECU and the user is able to fine pitch the sensors. Without the external OBD II Analizer, the all HHO Tuning are made under a teoretically setting, but you never know if the Fuel mixture is optimized or not.
After this Teoretically analog setting is done with the other analog devices, remain always one big issue, you have ONLY ONE Global setting, but this setting will be never match with the speed or the current status of your car!
For resolve this big issue, on the HHO OBD FC-Fuel Cutter we have implemented 4 programmable setting and each Preset will be Automatically recalled on the current Speed status of the Car!
This mean: when you drive slow, the first Preset will be recalled and will fine Tuning your MAP/MAF and OS Sensor, when you drive more Fast, the next Preset will be recalled and new Fine Tuning is sent to the all sensors. This for the all 4 Available Presets, all will be recalled Automatically as you drive, with the FULL control of the al setting and Fuel save under your eyes!
HHO OBD FC-Fuel cutter is much more: We have implemented the 3 Basic Gates: When the Coolant Temperature, the Veichle speed and Engine Speed match to the Saved Value parameters, the Gates turn to ON mode and the all MAP/MAF/O2 Values are sent to the all sensor!
New ideas, features or functions? No problem! HHO OBD FC Fuel cutter is Ready to LOAD new software application, tools or updates direct from the embedded SD Card Slot! Just download the new update file, copy on one standard SD card, insert on the HHO OBD FC Slot and Load it! Finally one complete HHO OBD tool that can never to be Obsolet as the other traditional Analog HHO Tuning Accessory.
HHO-OBD Remote Control TOP Features:
- OBD II Scantool Pro Realtime analizer, support the all legislate OBD II protocoll.
- 4 Programmable independent Presets maps
- Manual Mode Preset recall and Automatic Mode Preset recall, depend on the veichle speed reconized from OBD port.
- Realtime Sensor Editor:
- MAP/MAF= from 0 to 100% airflow cutting, 128 step resolution for fine pitch.
- O2 Lambda Sensor= Increase/Decrease O2 Sensor, with 128 step fine resolution, available for 2 Lambda sesnor.
- Graphics segment linee of the active status Sensor>Speed.
- OBD-2 Relatime scanning PID's:
- Coolant Temperature, with Gate function
- Veichle Speed, with Gate function
- Engine RPM, with Gate function
- Gate mode: Gate OFF= Maf/O2 Sensor NOT Active, Gate ON= Maf/O2 Sensors Activated.
- Oxygen sensor Scanning: O2 sensor 1= 0.00 > 1.2mV, O2 sensor 2= 0.00 > 1.2mV Or 2.5V mode by Jumper setting.
- Fuel Trim: Short and Long term bank
- GPH Fuel: realtime Liters for 100Km used current.
- SETUP Page:
- File List manager, FAT 32, Read new .BIN file, for software updates.
- Activate Preset mode: AUTO recall or MANUAL recall.
- Activate MAF sensor: ON or OFF ( the system can be used as ScanTool only)
- Activate O2 sesnor: ON or OFF ( the system can be used as ScanTool only)
- Scanning and display the current OBD Protocol used on the veichle.
HHO-OBD Remote Control Hardware specification:
- Standalone palmar AVR Remote control, measure only: 125X68X23 mm!
- Color display 2.2", 240X320 Pixel, LED Backlight.
- SD Card Slot, FAT32, for standard 4/8Gb SD card, used for software updates and new Application.
- Digital Encooder for data editor + Push Encooder for Enter confirmation parameters.
- Internal BUZZER sound system for warning messages, full software controlled.
- RJ45 Connector, standard 8 Pin connection cable system, Pin 1>1, NOT Twisted.
- +12/24V powersupply, from RJ45 cable
- Power comsumtion: 120mA
Sensor STN OBD II -MAF-O2 -board connection:
OBD II Scan Tool Features
- Support for all legislated OBD II protocols:
- ISO 15765-4 (CAN)
- ISO 14230-4 (Keyword Protocol 2000)
- ISO 9141-2 (Asian, European, Chrysler vehicles)
- SAE J1850 VPW (GM vehicles)
- SAE J1850 PWM (Ford vehicles)
- Support for non-legislated OBD protocols:
- ISO 15765
- ISO 11898 (raw CAN)
- Support for SAE J1939 OBD protocol
- Hardware specification:
- Terminal Block for the all wires connection.
- BATT: Power supply input 12V, UNDER key switch mode.
- CAN L - CAN H= CAN BUS connection
- K LINE = K LINE BUS connection.
- ISO = ISO BUS connection
- O2 Sensor 1= IN and OUT connection
- O2 Sensor 2= IN and OUT connection
- MAP/MAF= IN and OUT connection.
- RJ45 Cable connection to the HHO OBD Remote control.
- Power cosumption: 120mA ( including the Remote control)
- Measure: 62X110X23 mm.
HHO OBD FC-Cutter installed on Volkswagen Passat 2.0 Tdi
Click over the image for full size.
Complete Kit image: OBD Scantool + Digital EIFE/MAP/MAF controller HHO OBD FC Fuel Cutter on Blister package
Blister Package include:
- HHO-OBD FC Fuel Cutter Remote control.
- Sensor STN Scantool-Sensor connection box
- 70Cm RJ45 Cable
- 4 wires for Powersupply and OBD II protocoll connection.
Software release:
- 1.0=9.09.2014: First official release
- 1.1=19.09.2014:
- 1.2=30.09.204:
- 1.3=01.10.2014
- 1.4=02.10.2014
Exclusive distributon from www.hho-plus.com